Pickling is the removal of a thin layer (in form of stains, inorganic contaminants, foreign matter, grease, oil, rust or scale, everything) from the surface of steel pipes.
Category: Piping Fabrication and Testing
Reinforcement Pad Calculation for Branch Connection
A reinforcement pad or RF pad is used to strengthen the fabricated or welded pipe branch connection joints. Standard branch fittings such as Tee and …
Miter Elbow or Miter Bend Design Calculations
Miter Elbow or Miter Bend is a Fabricated Fitting used to change the pipeline direction. The Standard Fittings (Wrought Elbows) are not easily available and economical for the larger sizes.
Miter Bend Calculations For Fabrication Purpose
Miter Bend or Miter Elbow plays an important role in the piping or pipeline engineering field. Because standard Fittings (Elbow) are not easily available and economical for the large pipe sizes.
Pipe Welding Positions: 1G, 2G, 5G, and 6G
Pipe Welding Positions are referred to as the combination of the different positions of the welder and the job or specimen. Pipe welds are made under many different requirements and in different welding situations as per the job nature.
Hydrotest Procedure for Piping system
Hydrotest, also known as Hydrostatic test is a vital procedure in both construction and maintenance of the piping system. Before the new piping system runs into operation, it is necessary to make sure that, they are correctly commissioned, and are ready to use.